Wiki » Historie » Version 8
Maximilian Seesslen, 12.11.2026 13:48
| 1 | 1 | Maximilian Seesslen | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | 7 | Maximilian Seesslen | * 2 x CAN |
| 4 | * 2 x UART |
||
| 5 | 2 | Maximilian Seesslen | * Connect DAC to ADC. |
| 6 | * 2 further ADC inputs with different resistor dividers. |
||
| 7 | * Can even test debouncing; PWM to GPIO Input |
||
| 8 | 3 | Maximilian Seesslen | * Test slope counter, Hz etc. |
| 9 | 2 | Maximilian Seesslen | * Program internal flash |
| 10 | * Verify CRC calculation |
||
| 11 | * Any present SPI flash |
||
| 12 | * Any present I2C flash |
||
| 13 | 3 | Maximilian Seesslen | * Compare systimer with RTC |
| 14 | * Test some patterns in UID |
||
| 15 | * UCPD test platform |
||
| 16 | 1 | Maximilian Seesslen | * ADC fuer USBCPD |
| 17 | * HSE 8Mhz for USB |
||
| 18 | 7 | Maximilian Seesslen | * Event-loop LED |
| 19 | * USB to I2C adapter |
||
| 20 | 8 | Maximilian Seesslen | * VBUS sense; 100K/100K divider |
| 21 | 1 | Maximilian Seesslen | |
| 22 | Cheapest would be: |
||
| 23 | |||
| 24 | * STM32G0B1CBU6; UFQFPN48; 128 Kbytes flash; 2048 erase page |
||
| 25 | 7 | Maximilian Seesslen | * USBLC6-2SC6 |
| 26 | * USB 22 Ohm in reihe |
||
| 27 | * CC1/CC2 5K1 Ohm gegen GND |
||
| 28 | 3 | Maximilian Seesslen | |
| 29 | Connections: |
||
| 30 | |||
| 31 | * Debug |
||
| 32 | * USB-C; FRSTX, CC1, CC2 (Fast Role Swap Transmit) |
||
| 33 | 1 | Maximilian Seesslen | * PWM-LED + 5V output like CANIO |
| 34 | * I2C like CANIO |
||
| 35 | 5 | Maximilian Seesslen | * CAN-Bus x 2, via solder-bridges |
| 36 | 7 | Maximilian Seesslen | * 3V power output to supply test ICs |
| 37 | 5 | Maximilian Seesslen | |
| 38 | Other usefull function? |
||
| 39 | |||
| 40 | * CANIO as super big; RGB-LED controller |
||
| 41 | 6 | Maximilian Seesslen | * PEAK Klon / USB-CAN Adapter |
| 42 | * 1,8V; Transceiver benoetigen 2V signale |