Go 12V¶

The 5V line already dropped to 4,7V in good condition. I had big problems with

• sensemux
• CANDis displays got resetted on bad conditions
• Not sure if other issues have been related to poor voltage
• maybe need higher voltages in the future for bigger displays

24V would be nice but some CAN transceivers can only toleryte CAN-Hi/Low up to 14V.
Hard to find voltage regulators from 12V to 3V.
Is there one that can handle both 12V and 5V? -> CANDis

https://www.reichelt.de/de/de/shop/kategorie/lineare_spannungsregler-8693?filter=207%23~%23%2A%23~%23SOT-23-5%20%23~%23SOT-23-5%23~%230&PAGE=2

MCP 1754-3302CB: SOT-23-3; max. 17,4V; 300mV dropout; 150mA; 3,3V
MCP1703AT3002ECB: 3,3V
MCP1755: pin 4 needs to be high
Display braucht schon 120mA: ->250mA