Wiki » Historie » Version 11
Maximilian Seesslen, 27.10.2025 17:16
| 1 | 1 | Maximilian Seesslen | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | [[Eval]] |
||
| 4 | 2 | Maximilian Seesslen | |
| 5 | 4 | Maximilian Seesslen | h2. Driver board |
| 6 | 5 | Maximilian Seesslen | |
| 7 | 4 | Maximilian Seesslen | * One board has 51,24W with the warm LEDs. With LDB350 in general max. 52,8 Watt. |
| 8 | * Supply voltage: 12V-36V |
||
| 9 | * PWM: 100 ~ 1KHz; 2~10VDC or open circuit |
||
| 10 | |||
| 11 | h2. Controller board |
||
| 12 | 6 | Maximilian Seesslen | |
| 13 | 7 | Maximilian Seesslen | * Supply voltage: 12V-36V (min. 15V for VBus 12V) |
| 14 | 10 | Maximilian Seesslen | * Provides VBus 5V or 12V (optional, can be powered externally) |
| 15 | 8 | Maximilian Seesslen | * Switch 4 power lines |
| 16 | 10 | Maximilian Seesslen | ** VBus, Plant lamp, Media, 2 x Illumination |
| 17 | 8 | Maximilian Seesslen | * Can start via RTC or Button |
| 18 | 9 | Maximilian Seesslen | * Measure power consumption |
| 19 | * 4 PWM signals for regulator board(s) |
||
| 20 | * External I2C bus for regulator board(s) |
||
| 21 | * USB port for configuration |
||
| 22 | 11 | Maximilian Seesslen | * 2 CAN connectors to have it somwhere in the middle of the bus |