Eval » Historie » Version 23
Maximilian Seesslen, 06.10.2025 16:12
| 1 | 1 | Maximilian Seesslen | h1. Eval |
|---|---|---|---|
| 2 | |||
| 3 | 11 | Maximilian Seesslen | "https://www.seesslen.net/redmine/projects/slonce/wiki/Office":See |
| 4 | |||
| 5 | 8 | Maximilian Seesslen | h2. New Features compared to Mainswitch/CANSwitch |
| 6 | 1 | Maximilian Seesslen | |
| 7 | * More current |
||
| 8 | * Fix Wakeup |
||
| 9 | 6 | Maximilian Seesslen | ** Beim Mainswitch gab der Power-button einen Stromimpuls auf den ACQxxx und auf einen GPIO. Wenn das system von extern gespest wurde und die MCU schlafen war, konnte sie nicht wieder aufgewekt werden. |
| 10 | 1 | Maximilian Seesslen | * Periodic wakeups to make measurements: RTC |
| 11 | 8 | Maximilian Seesslen | ** RTC_OUT gibt spannung auf den ENABLE des |
| 12 | 1 | Maximilian Seesslen | * Diode ? Voltage-Drop issue |
| 13 | ** Ideal diode with Mosfet |
||
| 14 | * High voltage (24V) ? |
||
| 15 | ** Different connectors |
||
| 16 | * Global Timeserver; It already has batteries |
||
| 17 | * Real touch keys |
||
| 18 | 18 | Maximilian Seesslen | ** Why? In addition to increase illumination. But thats what candis was for. |
| 19 | 1 | Maximilian Seesslen | * Over-Temperature power off (PCB/Box) |
| 20 | * Buzzer? |
||
| 21 | ** indicate peridoc on/off during day time |
||
| 22 | 8 | Maximilian Seesslen | * External Solid State Relais for high power switching like Horo |
| 23 | 1 | Maximilian Seesslen | |
| 24 | * 4 Sectionen: SZ, WZ, MEMS, ? |
||
| 25 | ** Stoeren ungepowerte Platinen CAN? |
||
| 26 | 2 | Maximilian Seesslen | ** Erzwingt Sternkonstelation |
| 27 | 1 | Maximilian Seesslen | |
| 28 | h2. Components |
||
| 29 | |||
| 30 | Ideal Diode: |
||
| 31 | |||
| 32 | * VN7140ASTR; up to 0,280 ohm, 0,120 Ohm typical |
||
| 33 | * LTC4412; 2,9V; TME 2.60EUro; External P-MOSFET needed; Waere perfekt gewesen; load sharing |
||
| 34 | * TPS2410 N.A. |
||
| 35 | * LM5050 |
||
| 36 | * MAX40200; 1A only, no external MOSFET |
||
| 37 | 8 | Maximilian Seesslen | * LM74700; 1.27€; perfekt; load sharing |
| 38 | 1 | Maximilian Seesslen | |
| 39 | 4 | Maximilian Seesslen | --LTC4412 is the only available-- |
| 40 | 1 | Maximilian Seesslen | |
| 41 | TMP1075; TMP1075NDRLR; 0,31€ |
||
| 42 | Muesste noch viel rumliegen haben |
||
| 43 | 4 | Maximilian Seesslen | |
| 44 | 1 | Maximilian Seesslen | |
| 45 | h2. Calculations |
||
| 46 | |||
| 47 | * 240V/600mA eigentlich ausreichend; 144W |
||
| 48 | * AQH3213A |
||
| 49 | * STM32F030K6T6 should draw 20µA in stop |
||
| 50 | * 700mAh=700000µAh |
||
| 51 | * 700000µAh/20µA=3500h=1458d=ca 4 years |
||
| 52 | |||
| 53 | h2. MCU |
||
| 54 | |||
| 55 | * "Find":https://www.tme.eu/de/katalog/st-mikrocontroller_112866/?params=375:1453589,1453450,1853043,1634756,1634761,1938598,1473784,1613924;3461:1979124,1979125 |
||
| 56 | * STM32F072C8T6 |
||
| 57 | ** 2V, ok, Entladeaschlussspannung |
||
| 58 | ** Nur LQFP48; 4.53Euro |
||
| 59 | ** 1,85 € Reichelt STM32F072CBT6 128KB Flash |
||
| 60 | 7 | Maximilian Seesslen | ** RTC_OUT out PC13 |
| 61 | 1 | Maximilian Seesslen | * STM32H503CBT6, "STM32H503KBU6":https://www.tme.eu/Document/e92fcde7cdebb20ebbd5639f57dc7863/stm32h503cb.pdf |
| 62 | ** 3.20Euro |
||
| 63 | * Fuer VBAT wird beim STM32H503KBU6 auch FQFP48 benoetigt. |
||
| 64 | 8 | Maximilian Seesslen | |
| 65 | h2. Number of LED drivers |
||
| 66 | 7 | Maximilian Seesslen | |
| 67 | 12 | Maximilian Seesslen | Living room has 4 lamps, maybe 6 later. |
| 68 | 10 | Maximilian Seesslen | |
| 69 | 1 | Maximilian Seesslen | h2. Issues |
| 70 | |||
| 71 | h3. Wie Straenge schalten |
||
| 72 | |||
| 73 | * 4 x LTC4412 umstaendlich, E.g. status ruecklesen |
||
| 74 | * Jeweils 2 Mosfets notwendig um zu isolieren, klein + gross |
||
| 75 | 16 | Maximilian Seesslen | * Wozu Stränge? 2 direkt verbundene Buchsen reichen nicht? Auch nur um sich allenfalls Verteiler zu sparen. |
| 76 | |||
| 77 | h3. USB interface? |
||
| 78 | |||
| 79 | * Usable with Raspberry or so. |
||
| 80 | |||
| 81 | 13 | Maximilian Seesslen | h3. Light optional |
| 82 | |||
| 83 | * Media does not need light. The name is "helios". Use CANSwitch then. |
||
| 84 | 15 | Maximilian Seesslen | * But having the regulators in batteries is nice. They work even without MCU board. |
| 85 | |||
| 86 | * 4xPWM |
||
| 87 | * 2xTerminals; IN+OUT |
||
| 88 | 1 | Maximilian Seesslen | * Switch can be done on helios, only for first block |
| 89 | 17 | Maximilian Seesslen | ** If the switch is also on the blocks, Single power supply can be used |
| 90 | 20 | Maximilian Seesslen | ** Do i really have multiple power supplys for different LEDs? Could be, an active one for High power and an small one for nice ambience. |
| 91 | 1 | Maximilian Seesslen | * Must not connect Grounds of different power supplys |
| 92 | 17 | Maximilian Seesslen | |
| 93 | Das mit IDC oder aehnlichem zu machen klingt nice. Dann gehen theoretisch 4x4 (4xNetzteile schalten), man braucht 'nur' 4xPWM, Kaskadierung. |
||
| 94 | Alternativ 'addresse' einstellbar. Dann ist man noch flexibler, e.g. |
||
| 95 | 8 x kalt, 8 x warm. |
||
| 96 | 8 x Zimmer, 4 x Tisch. |
||
| 97 | 1 | Maximilian Seesslen | |
| 98 | 23 | Maximilian Seesslen | "B2B-Steckverbinder":https://www.tme.eu/de/katalog/platine-zu-platine-steckverbinder_100569 |
| 99 | 18 | Maximilian Seesslen | Kabel: 4xPWM, 4xSwitch VDD, GND -> 10P |
| 100 | 19 | Maximilian Seesslen | |
| 101 | DIP-Switches: DS04254204BKSMT |